
Loki Cinemascope
Loki Cinemascope
The Barco Loki Cinemascope offers the same Ultra HD enhancements as the Barco Loki projector, coupled with a high-capacity 2.37:1 aspect DLP engine. Its exceptional design allows a 2.40:1 film to be shown without requiring an anamorphic lens. The projector also provides Barco’s renowned single step image processing and low latency scaling technologies.
Professional-grade optics
By basing Loki Cinemascope on a proven optical architecture, custom-designed aspherical glass elements and enhanced low dispersion glass lenses, image quality is in a class of its own. Contrast is not only increased, but the details within the darkest parts of the image are more visible.
State-of-the-art electronics
The Loki Cinemascope has a unique automatic aspect ratio detection function. It will look for 2.40:1 content and automatically scale the image to fit the 5120x2160 resolution and of course change back to 16:9 (3840x2160) if you have content in that format. It will also change aspect ratio when a 2.40:1 format movie has a menu’s outside the active picture frame. You can also switch manually between the different formats.
Laser light source
Projector type: Single chip DLP
Technology: 0.9" DMD™
Resolution: 5,120 x 2,160 (5K UHD)
Aspect ratio: 2.37:1 (CinemaScope)
Light source: Laser phosphor
Light source lifetime: 20,000 - 60,000 hours (depending on brightness mode)
Light output:
DCI (P3) Color Wheel: Up to 5,100 ANSI lumens
T Color Wheel: Up to 6,500 ANSI lumens
M Color Wheel: Up to 7,800 ANSI lumens
CLO (constant light output): Yes
Contrast ratio: 1,800:1 Sequential
450:1 ANSI
Brightness uniformity: 90%
Lens range:
EN68 (0.30:1)
EN47 (0.65:1)
EN66 (0.80 - 1.21:1)
EN63 (1.20 - 1.70:1)
EN61 (1.70 - 2.50:1)
EN44 (2.50 - 4.60:1)
Optical lens shift:
Up to 122% vertical lens shift & up to 36% horizontal lens shift (depending on lens selection) Motorized zoom, focus, shutter and lens shift (depending on lens selection)
Optical dowser: Yes
Color correction: P7 RealColor™
Color gamut:
DCI (P3) Color Wheel: DCI P3
T Color Wheel: REC.709
M Color Wheel: REC.709
Image processing: Embedded warp, bow correction & blend engine
WARP: Four corner warp
Orientation: 360° rotation, no restrictions
Network connection: 10/100 Ethernet via RJ45 connection
Integrated web server Yes
HDR: HDR10
3D: Active stereoscopic 3D* (requires firmware release 1.5 onwards)
please contact for details
Inputs:
1 x HDMI 2.0a (HDCP 2.2), 1 x HDBaseT (HDCP 1.4), 2 x dual link DVI-D, 2 x Display Port, HDSDI
1 x RJ45 Ethernet, RS232, 3 x USB, DMX in/out*
Input resolutions: VGA up to 4K UHD (3,840 x 2,160) @ 60Hz
Up to 2,560 x 1,600 @ 120Hz
Control:
IR, RS232, TCP/IP, 3 x 12v Trigger* (requires firmware release 1.6 onwards)
Driver modules available for: Crestron, Control4 and Savant
Power requirements: 100 -240V / 50 -60Hz
Power consumption: 1,600 W Max.
Noise level (typical at 25°C/77°F): 38 dB(A)
Operating temperature: 10 to 45 °C (sea level)
Operational humidity: 20 to 80% (relative humidity)
BTU per hour: Max. 6,000 BTU/h
Airflow requirements:
Air Inlet (from Rear w/Feet Down): Right Side
Exhaust (from Rear w/Feet Down): Rear
Clearance Distances (Front / Left / Right / Rear): 1cm / 1cm / 50cm / 100cm
Exhaust airflow: 193 ft3/min @ 25 °C
Dimensions:
(WxLxH) 575 x 730 x 295 mm (excluding lens)
22.64 x 28.74 x 11.61 in. (excluding lens)
Weight:
44.5 kg / 98.1 lbs (excluding lens)
Shipping Dimensions 720 x 910 x 630 mm (excluding lens - packaged separately)
28.4 x 35.8 x 24.8 in. (excluding lens - packaged separately)
Shipping weight: 55kg / 121.3 lbs (excluding lens - packaged separately)
Storage temperature: -20 to 60 °C
Storage humidity: 10 to 90% (relative humidity)
Standard accessories: Power cord(s), wireless remote control
Certifications: CE, FCC Class A and cCSAus
Warranty: Limited 3 years parts and labor
Extendable up to 5 years
* Firmware upgradable
Please contact